Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

As shown in Figure 1, there are two autonomous systems in the network. Each AS contains a PIM-SM domain, the multicast source is in PIM-SM1, the receiver is in PIM-SM2. The network requirement is that the receiver in domain PIM-SM2 can receive multicast data sent by the multicast source in domain PIM-SM1.

...

Configuring MSDP to establish MSDP peer relationship between RPs in each PIM-SM domain , which can to achieve inter-domain multicast communication.

  1. Configure the IP address for each switch interface and implement and configure OSPF protocol in the ASs to ensure route reachability within each AS.
  2. To ensure route reachability between ASs, configure EBGP eBGP peers between ASs and import OSPF route routes into BGP route.
  3. Enable PIM-SM on each multicast interface, and enable the IGMP on the host-side interface.
  4. Configure static RP on each PIM-SM router in domains PIM-SM1 and PIM-SM2, and specify the loopback interface address of Switch 2 and Switch 3 as the RP address.
  5. Configure MSDP source and member on each RP , to establish MSDP peer relationship between RP RPs in each domain.

Procedure

Switch 1

...

  • You can view PIM routes on the switches by using run show mroute Multicast source 200.200.200.2 in the PIM-SM1 domain sends multicast data to multicast groups 237.0.0.1, 237.0.0.2, 237.0.0.3, 237.0.0.4, 237.0.0.5, 238.0.0.1 and 239.255.255.250, receiver . Receiver in PIM-SM2 can receive the multicast data.

...

  • You can view (S, G) entries cache on MSDP peer switches by using the run show msdp saRP” is the source RP address that advertises the (S, G) entry. “RP” value “-” indicates that the device running the show command is the source RP advertises advertising the (S, G) entry.
Code Block
admin@Switch2# run show msdp sa
Source                  Group                   RP  Local  SPT    Uptime
200.200.200.2          237.0.0.1                -      y    -  00:01:39
200.200.200.2          237.0.0.2                -      y    -  00:00:06
200.200.200.2          237.0.0.3                -      y    -  00:00:06
200.200.200.2          237.0.0.4                -      y    -  00:00:06
200.200.200.2          237.0.0.5                -      y    -  00:00:06
200.200.200.2          238.0.0.1                -      y    -  00:01:39

admin@Switch3# run show msdp sa
Source                  Group             RP      Local  SPT  Uptime
200.200.200.2          237.0.0.1          3.3.3.3      n    y  00:32:16
200.200.200.2          237.0.0.2          3.3.3.3      n    y  00:00:39
200.200.200.2          237.0.0.3          3.3.3.3      n    y  00:00:39
200.200.200.2          237.0.0.4          3.3.3.3      n    y  00:00:39
200.200.200.2          237.0.0.5          3.3.3.3      n    y  00:00:39
200.200.200.2          238.0.0.1          3.3.3.3      n    y  00:32:16
200.200.200.2    239.255.255.250          3.3.3.3      n    y  00:00:11

...