Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

If management VRF is enabled, and you want to find the next-hop route in management VRF when running the commands traceroute/SCP/ping/apt get/SSH at Linux prompt, that is, using Eth0/1 management interface as the route interface, you have to add ip vrf exec mgmt-vrf before the commands.

The example format of these commands is shown below:

sudo ip vrf exec <mgmt-vrf|vrf-name> traceroute 10.10.51.11

sudo ip vrf exec <mgmt-vrf|vrf-name> scp admin@10.10.51.18:/home/Pica8.pm

sudo ip vrf exec <mgmt-vrf|vrf-name> ping 10.10.51.1

sudo ip vrf exec <mgmt-vrf|vrf-name> apt-get update

sudo ip vrf exec <mgmt-vrf|vrf-name> ssh <ip-address>

ip vrf exec <mgmt-vrf|vrf-name> is added to specify which VRF to run the command in. If not specified, find the next hop routing information from the default VRF.

  • No labels