Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set protocols bgp neighbor send-community command enables community and/or extended community exchange with the specified neighbor. When this command is configured for the peer-group, then all the neighbors that are part of peer-group will send the community values to the peers.
The delete protocols  bgp neighbor send-community command will not allow the neighbor to send community values to the specific neighbors that are part of peer-group.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicastsend-community type [both|extended|standard|large|all]

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicastsend-community type [both|extended|standard|large|all]




vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast}Specifies the type of the address family.
neighbor <ip>Specifies the IP address of a peer.
peer-group <peer-group>Specifies a peer group.
interface <interface>Specifies an interface for BGP connection.


The parameters standard, large and extended send only the respective community numbers.

all: both standard and extended communities will be sent to the neighbor.

• This example allows community values to be sent to a specific neighbor. 

admin@XorPlus# set protocols bgp neighbor ipv4-unicast send-community type both
admin@XorPlus# commit

  • No labels