Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The set routing route-map match source-protocol command matches the source routing protocol value of the route with the value configured in the match clause.
The delete routing route-map match source-protocol command restores the default behavior of not matching the source routing protocol value of the route.

Command Syntax

set routing route-map <route-map-name> order <NUMBERmatch source-protocol <bgp|connected|kernel|ospf|ospf6|static|system>

delete routing route-map <route-map-name> order <NUMBER> match source-protocol <bgp|connected|kernel|ospf|ospf6|static|system>




route-map <route-map-name>

Specifies the name of the route map. Required.

order <NUMBER>

Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.

source-protocol <bgp|connected|kernel|ospf|ospf6|static|system>

Specifies the bgp, connected, ospf, kernel, system or static value to be matched with the route entry source protocol.


  •  Configure a match clause in the route map to match the source routing protocol value:
admin@Xorplus# set routing route-map GlobalMap order 10 match source-protocol bgp
admin@Xorplus# set routing route-map GlobalMap order 10 matching-policy permit
admin@Xorplus# commit
  • No labels