Programmable Internetworking & Communication Operating System Docs ... Click Spaces -> Space Directory to see docs for all releases ...
Page tree
Skip to end of metadata
Go to start of metadata

The command ovs-vsctl is a utility for querying and configuring the Open vSwitch. The Open vSwitch configuration is kept in a database managed by the ovsdb-server process.The ovs-vsctl command connects to ovsdb-server, which maintains the Open vSwitch configuration database. Using this connection, ovs-vsctl queries and applies changes to the database, based on the supplied commands.

See ovs-vsctl help for more information about the utility.

admin@PICOS-OVS:~$ ovs-vsctl --help
ovs-vsctl: ovs-vswitchd management utility
usage: ovs-vsctl [OPTIONS] COMMAND [ARG...]

Open vSwitch commands:
  init                        initialize database, if not yet initialized
  show                        print overview of database contents
  emer-reset                  reset configuration to clean state

Bridge commands:
  add-br BRIDGE               create a new bridge named BRIDGE
  add-br BRIDGE PARENT VLAN   create new fake BRIDGE in PARENT on VLAN
  del-br BRIDGE               delete BRIDGE and all of its ports
  list-br                     print the names of all the bridges
  br-exists BRIDGE            exit 2 if BRIDGE does not exist
  br-to-vlan BRIDGE           print the VLAN which BRIDGE is on
  br-to-parent BRIDGE         print the parent of BRIDGE
  br-set-external-id BRIDGE KEY VALUE  set KEY on BRIDGE to VALUE
  br-set-external-id BRIDGE KEY  unset KEY on BRIDGE
  br-get-external-id BRIDGE KEY  print value of KEY on BRIDGE
  br-get-external-id BRIDGE  list key-value pairs on BRIDGE

Port commands (a bond is considered to be a single port):
  list-ports BRIDGE           print the names of all the ports on BRIDGE
  add-port BRIDGE PORT        add network device PORT to BRIDGE
  add-bond BRIDGE PORT IFACE...  add bonded port PORT in BRIDGE from IFACES
  del-port [BRIDGE] PORT      delete PORT (which may be bonded) from BRIDGE
  port-to-br PORT             print name of bridge that contains PORT

Interface commands (a bond consists of multiple interfaces):
  list-ifaces BRIDGE          print the names of all interfaces on BRIDGE
  iface-to-br IFACE           print name of bridge that contains IFACE

Controller commands:
  get-controller BRIDGE      print the controllers for BRIDGE
  del-controller BRIDGE      delete the controllers for BRIDGE
  set-controller BRIDGE TARGET...  set the controllers for BRIDGE
  get-fail-mode BRIDGE       print the fail-mode for BRIDGE
  del-fail-mode BRIDGE       delete the fail-mode for BRIDGE
  set-fail-mode BRIDGE MODE  set the fail-mode for BRIDGE to MODE

Manager commands:
  get-manager                print the managers
  del-manager                delete the managers
  set-manager TARGET...      set the list of managers to TARGET...

SSL commands:
  get-ssl                     print the SSL configuration
  del-ssl                     delete the SSL configuration
  set-ssl PRIV-KEY CERT CA-CERT  set the SSL configuration

Switch commands:
  emer-reset                  reset switch to known good state

Database commands:
  list TBL [REC]              list RECord (or all records) in TBL
  find TBL CONDITION...       list records satisfying CONDITION in TBL
  get TBL REC COL[:KEY]       print values of COLumns in RECord in TBL
  set TBL REC COL[:KEY]=VALUE set COLumn values in RECord in TBL
  add TBL REC COL [KEY=]VALUE add (KEY=)VALUE to COLumn in RECord in TBL
  remove TBL REC COL [KEY=]VALUE  remove (KEY=)VALUE from COLumn
  clear TBL REC COL           clear values from COLumn in RECord in TBL
  create TBL COL[:KEY]=VALUE  create and initialize new record
  destroy TBL REC             delete RECord from TBL
  wait-until TBL REC [COL[:KEY]=VALUE]  wait until condition is true
Potentially unsafe database commands require --force option.

  --db=DATABASE               connect to DATABASE
                              (default: unix:/ovs/var/run/openvswitch/db.sock)
  --no-wait                   do not wait for ovs-vswitchd to reconfigure
  --retry                     keep trying to connect to server forever
  -t, --timeout=SECS          wait at most SECS seconds for ovs-vswitchd
  --dry-run                   do not commit changes to database
  --oneline                   print exactly one line of output per command

Pica commands:
  show-running-config                           print current ovsdb config
  show-valid-port [FRONT]                       print all valid ports or one
  set-port-breakout ALL|FRONT TRUE|FALSE        use breakout cable or not
  set-port-name FRONT [1,4]=default|XXX         modify name of sub-port on FRONT
  set-match-mode MODE:OPTIONS=PRIORITY          set match-modes
  show-match-mode                               print current match-modes
  set-gtp-udp-dst-ports PORT...                 set gtp udp ports, PORT is up to 4
  show-gtp-udp-dst-ports                        show gtp udp ports
  set-match-vxlan-vni-enable TRUE|FALSE         enable or disable vxlan vni matching
  show-match-vxlan-vni                          show vxlan vni matching
  set-vxlan-udp-dst-port [1, 65535]             set vxlan udp destination port
  show-vxlan-udp-dst-port                       show vxlan udp destination port
  set-vntag-ethertype [0x6000, 0xffff]          set VN tag ethertype
  show-vntag-ethertype                          show VN tag ethertype
  set-snmp-enable TRUE|FALSE                    enable or disable snmp
  show-snmp                                     show snmp
  set-snmp-trap-targets    IPv4(s)              set snmp trap targets
  show-snmp-trap-targets                        show snmp trap targets
  set-snmp-community-name                       set snmp agent community name
  show-snmp-community-name                      show snmp agent community name
  set-cos-map TRUE|FALSE                        enable or disable cos-mapping
  show-cos-map [IFACE]                          show cos-mapping
  set-vlan-priority-cos-map TRUE|FALSE          enable or disable vlan-priority-cos-mapping
  show-vlan-priority-cos-map                    show vlan-priority-cos-mapping
  set-egress-mode TRUE|FALSE [TABLE]            set egress mode
  show-egress-mode                              show egress-mode
  set-combinated-mode TRUE|FALSE                enable or disable combinated-mode
  show-combinated-mode                          show combinated-mode
  set-l2gre-key-length                          set l2gre key length
  show-l2gre-key-length                         show l2gre key length
  set-proxy-arp TRUE|FALSE SUBNETS              set proxy arp
  show-proxy-arp                                show proxy arp
  set-proxy-icmpv6 TRUE|FALSE SUBNETS           set proxy icmpv6 for NS/NA
  show-proxy-icmpv6                             show proxy icmpv6
  set-l2-mode TRUE|FALSE [TABLE]                set l2 mode
  show-l2-mode                                  show l2 mode
  set-l3-mode TRUE|FALSE [TABLE]                set l3 mode
  show-l3-mode                                  show l3 mode
  set-l2-l3-buffer-mode [0, 5]                  set l2/l3 buffer mode(0-5)
  show-l2-l3-buffer-mode                        show l2/l3 buffer mode
  set-l2-l3-preference TRUE|FALSE               set l2/l3 flow preference
  show-l2-l3-preference                         show l2/l3 flow preference
  set-max-ecmp-ports NUM                        set l3 max ecmp ports to NUM(2~32 and a power of 2)
  show-max-ecmp-ports                           show l3 max ecmp ports
  set-lag-advance-hash-mapping-fields FIELDS    set hash fields of advance hash-mapping
  show-lag-advance-hash-mapping-fields          show hash fields of advance hash-mapping
  set-udf-mode MODE                             set udf mode, MODE's format is udfN(l2|l3,offset=OFS,length=LEN),...
                                                only up to 4 udfs(udf0,udf1,udf2,udf3) are supported
  show-udf-mode                                 show udf mode
  set-max-resilient-hash-lag-count COUNT        set lag-max-resilient-hash-lag-count.
                                                COUNT is max count of lags which,
                                                can be set to resilient hash,
                                                the valid value of COUNT is
                                                1, 2, 4, 8, 16, 32, 64.
                                                The default value is 1.
  show-max-resilient-hash-lag-count             show lag-max-resilient-hash-lag-count.
  set-macro-udf MODE                            set macro udf mode instead of offset and length, look up show udf field
  show-macro-udf                                show macro udf mode
  show-udf-field                                options for macro udf
  set-egress-mc-queue-dynamic [0,7] TRUE|FALSE  set certain queue id multicast dynamic buffer enable
  set-egress-shared-queue-ratio [0,7] [0,100]   set certain queue id shared buffer ratio
  show-egress-shared-queue-ratio                show added queue id shared buffer ratio
  set-loopback-enable TRUE|FALSE                set loopback enable or disable
  set-option-match-vlan-type TRUE|FALSE         enable or disable matching untagged pakcets
  show-option-match-vlan-type                   show vlan format enable or disable
  set-select-group-hash-fields [FIELDS]         set select-group-hash-fields
  show-select-group-hash-fields                 show current select-group-hash-fields
  set-flow-handling-mode [MODE]                 set flow-handling-mode
  show-flow-handling-mode                       show current flow-handling-mode
  set-rdbgc4 [TYPE]                             set rdbgc4
  show-rdbgc4                                   show current rdbgc4
  set-lag-members-sorted                        set lag members sorted
  show-lag-members-sorted                       show lag members sorted
  set-group-ranges [GROUPS]                     set special groups(lag-select-groups, ecmp-select-groups, 
                                                ingress-mirror-groups, egress-mirror-groups) ranges
  show-group-ranges                             show current group ranges
  set-meter-ranges [METERS]                     set special meters(egress-meter) ranges
  show-meter-ranges                             show current meter ranges
  set-l3-ecmp-hash-fields FIELDS                set l3 ecmp hash fields
  show-l3-ecmp-hash-fields                      show l3 ecmp hash fields
  set-l3-egress-keep-fields [FIELDS]            set default keep fields in l3 egress interface
  show-l3-egress-keep-fields                    show default keep fields in l3 egress interface
  disable-extend-group TRUE|FALSE               disable or enable extend group for arp/mpls flows
  show-extend-group                             show extend group config
  set-symmetric-hash [LAG|ECMP] TRUE|FALSE      disable or enable symmetric hash
  show-symmetric-hash                           show symmetric hash config
  set-flow-counter-mode both|bytes|packets      set flow counter mode
  show-flow-counter-mode                        show flow counter mode
  set-ttp-enable TRUE|FALSE                     set ttp module enable or disable
  set-ttp-file FILE                             set ttp file name
  show-ttp                                      show ttp status and file name
  set-counter-interval [10,1000]                set counter interval 
  show-counter-interval                         show counter interval 
  display-settings                              show the configurations in OVSDB through ovs-vsctl comands

Logging options:
  -vSPEC, --verbose=SPEC   set logging levels
  -v, --verbose            set maximum verbosity level
  --log-file[=FILE]        enable logging to specified FILE
                           (default: /ovs/var/log/openvswitch/ovs-vsctl.log)
  --syslog-target=HOST:PORT  also send syslog msgs to HOST:PORT via UDP
  --no-syslog             equivalent to --verbose=vsctl:syslog:warn

Active database connection methods:
  tcp:IP:PORT             PORT at remote IP
  ssl:IP:PORT             SSL PORT at remote IP
  unix:FILE               Unix domain socket named FILE
Passive database connection methods:
  ptcp:PORT[:IP]          listen to TCP PORT on IP
  pssl:PORT[:IP]          listen for SSL on PORT on IP
  punix:FILE              listen on Unix domain socket FILE
PKI configuration (required to use SSL):
  -p, --private-key=FILE  file with private key
  -c, --certificate=FILE  file with certificate for private key
  -C, --ca-cert=FILE      file with peer CA certificate

Other options:
  -h, --help                  display this help message
  -V, --version               display version information

See ovs-vsctl main page for detailed syntax and additional information.

admin@Switch$man ovs-vsctl
ovs-vsctl(8)                                       Open vSwitch Manual                                       ovs-vsctl(8)
       ovs-vsctl - utility for querying and configuring ovs-vswitchd
       ovs-vsctl [options] -- [options] command [args] [-- [options] command [args]]...
       The  ovs-vsctl  program  configures ovs-vswitchd(8) by providing a high-level interface to its configuration data-
       base.  See ovs-vswitchd.conf.db(5) for comprehensive documentation of the database schema.
       ovs-vsctl connects to an ovsdb-server process that maintains an Open vSwitch configuration database.   Using  this
       connection, it queries and possibly applies changes to the database, depending on the supplied commands.  Then, if
       it applied any changes, by default it waits until ovs-vswitchd has finished reconfiguring itself before it  exits.
       (If you use ovs-vsctl when ovs-vswitchd is not running, use --no-wait.)
       ovs-vsctl  can  perform any number of commands in a single run, implemented as a single atomic transaction against
       the database.
       The ovs-vsctl command line begins with global options (see OPTIONS below for details).   The  global  options  are
       followed by one or more commands.  Each command should begin with -- by itself as a command-line argument, to sep-
       arate it from the following commands.  (The -- before the first command is optional.)  The command  itself  starts
       with  command-specific  options,  if  any, followed by the command name and any arguments.  See EXAMPLES below for
       syntax examples.
   Linux VLAN Bridging Compatibility
       The ovs-vsctl program supports the model of a bridge implemented by Open vSwitch, in which a  single  bridge  sup-
       ports  ports  on  multiple  VLANs.   In  this model, each port on a bridge is either a trunk port that potentially
       passes packets tagged with 802.1Q headers that designate VLANs or it is assigned a single implicit  VLAN  that  is
       never tagged with an 802.1Q header.
       For  compatibility  with  software designed for the Linux bridge, ovs-vsctl also supports a model in which traffic
       associated with a given 802.1Q VLAN is segregated into a separate bridge.  A special form of  the  add-br  command
       (see below) creates a ``fake bridge'' within an Open vSwitch bridge to simulate this behavior.  When such a ``fake
       bridge'' is active, ovs-vsctl will treat it much like a bridge separate from its ``parent bridge,'' but the actual
       implementation in Open vSwitch uses only a single bridge, with ports on the fake bridge assigned the implicit VLAN
       of the fake bridge of which they are members.  (A fake bridge for VLAN 0 receives packets that have no 802.1Q  tag
       or a tag with VLAN 0.)
<Some output omitted>

  • No labels