The show system management-ethernet command shows the configuration information, status and traffic statistics information of the management interface.

 

Command Syntax

show system management-ethernet [eth0 | eth1]

 

Parameter

None.

 

Example

admin@XorPlus# run show system management-ethernet eth0
eth0     Hwaddr: 00:18:23:30:e5:72       State: UP
        Gateway  : 192.168.10.1
        Inet addr:
                   192.168.10.5/24
          Traffic statistics
        Input Packets......................3620
        Input Bytes........................462971
        Output Packets.....................597
        Output Bytes.......................75459