The set protocols snmp trap-group event mac-threshold limit command sets the limit threshold for MAC address table usage monitoring to send SNMP Trap messages.


Command Syntax

set protocols snmp trap-group event mac-threshold limit <limit-value>


Parameter

Parameter

Description

limit <limit-value>

Specifies the limit threshold for MAC address table usage monitoring to send SNMP Trap messages. The value is an integer that ranges from 1 to 100, indicating 1% to 100%.

The default value is 50.


Usage Guidelines

Use this command to set the MAC address table usage limit threshold. When MAC address table usage exceeds the limit threshold over a continuous period of time, the system logs the event and sends an SNMP Trap message. By viewing log information, you can learn about MAC address table usage.

NOTE:

Please set the MAC address table usage monitoring limit threshold carefully. If the MAC address table usage limit threshold is set too small, the system generates alarms frequently. If the MAC address table usage limit threshold is set too large, you cannot get MAC address table usage overload immediately.


Example

admin@Xorplus# set protocols snmp trap-group event mac-threshold limit 50
admin@Xorplus# commit