This command is not available for N32xx series switches.

The set poe power management-mode command configures PoE power management-mode on all the ports or on a specific ethernet port.


Command Syntax

set poe power management-mode <value>


Parameter

<value>: The value is an integer. For AS4610-30P, AS4610-54P and AS4630-54PE, the value ranges from 1 to 4. For other PoE supported switches, the value ranges from 1 to 6. The default value is 1.

  1                             Static Power Management with Port Priority

  2                             Dynamic Power Management with Port Priority

  3                             Static Power Management without Port Priority

  4                             Dynamic Power Management without Port Priority

                 5                             Class based Power Management with Port Priority. Supported only on N3048EP-ON and N3132PX.

                 6                             Class based Power Management without Port Priority. Supported only on N3048EP-ON and N3132PX.


1:

2:

3:

4:

5:

 6:


Example

This example is to configure power management-mode to 1:

admin@XorPlus# set poe power management-mode 1
admin@XorPlus# commit