To configure the time for a switch to delete a route, use the set protocols rip interface vif address deletion-delay command.

Command Syntax

set protocols rip interface interface-name vif vif-interface address ip-address deletion-delay time


interface-nameInterface name.
vif-interfaceVirtual network interface name.
ip-addressIP address of the interface for RIP.
timeTime in seconds of deletion route. The range is 10-180,000


The following example configures 10 seconds as the time for the switch to delete a route:

admin@Switch# set protocols rip interface vlan20 vif vlan20 address deletion-delay 100