Users can set storm control mode for a specified port.


Command Syntax
set interface gigabit-ethernet <port> storm-control <mode> kbps <value>
delete interface gigabit-ethernet <port> storm-control [<mode> | kbps]


Parameter
• <port>ethernet switching port identifier,the valid ports range 1-52
• <mode> packets forwarding mode

<value> Kilo bits per second, [0..10000000]. Note, when the value of the storm control is set to 0, it means that data packets are not allowed to pass.


Example
• This example set broadcast storm control for ge-1/1/1:

admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 storm-control broadcast kbps 1000
admin@XorPlus# commit