Users can enable or disable forward error correction on ports. Fec works if the follow conditions are satisfied at the same time.

The ports can link up when the two connected ports both enable or disable fec at the same time.


Command Syntax
set interface gigabit-ethernet <port> fec <boolen>


Parameter
<port> ethernet switching port identifier
<boolen> port speed identifier,values are as follows:


Example
• This example disables forward error correction on port xe-1/1/1:

root@XorPlus# set interface gigabit-ethernet xe-1/1/1 fec false
root@XorPlus# commit