The run show pim neighbors command shows information about PIM neighbors.


Command Syntax

run show pim neighbors


Parameter

None.


Example

admin@Xorplus# run show pim neighbors
Interface    DRpriority NeighborAddr    V   Mode   Holdtime   Timeout
----------   ---------- -------------   -   ----   --------   -------
vlan20       1          20.0.0.2        2   Sparse 105        84    
vlan60       1          60.0.0.3        2   Sparse 105        83       

Table 1 Description of the run show pim neighbors command output

Item

Description

Interface

Indicates interfaces that enabled PIM-SM.

DRpriority

Indicates DR priority.

NeighborAddr

Indicates the neighbor address.

V

Indicates the version of PIM protocol. Currently the only PIM version 2 is supported.

Mode

Indicates that mode of the PIM protocol, Sparse or Dense. Currently the only Sparse mode is supported.

Holdtime

Holdtime of the PIM neighbor.

Timeout

Amount of time left before a PIM relationship times out.