The set protocols pimsm4 bootstrap cand-bsr scope-zone cand-bsr-by-vif-addr command configures the IP address of a VLAN interface or loopback interface to use as the C-BSR in a multicast scope zone.
set protocols pimsm4 bootstrap cand-bsr scope-zone <IPv4Net> cand-bsr-by-vif-addr <IP-address>
Specifies a range of multicast scope zone that can serve on the C-BSR. The value can be any sub-range of 184.108.40.206/4.
Specifies the IP address of a VLAN interface or loopback interface to use as the C-BSR.
To avoid frequent protocol changes caused by interface flapping, using loopback interfaces is recommended.
One or more C-BSRs need to be configured in a PIM-SM domain. A BSR is elected from C-BSRs. When multiple C-BSRs take part in the BSR election in the PIM-SM domain, the priority and IP address of the C-BSRs are used to in the BSR election process:
admin@Xorplus# set protocols pimsm4 bootstrap cand-bsr scope-zone 220.127.116.11/8 cand-bsr-by-vif-addr 10.10.61.10 admin@Xorplus# commit