The set firewall filter copp sequence from destination-port command configures a firewall filter rule based on the destination port for traffic classification.


Command Syntax

set firewall filter copp sequence <number> from destination-port <port-number>


Parameter

Parameter

Description

sequence <number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

The 15 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules.

destination-port <port-number>

Specifies the destination port number. The value is an integer.

 

Usage Guidelines

You can run the set firewall filter copp sequence from destination-port command to configure a firewall filter rule based on the destination port for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.

 

Example

•  Configure a firewall filter rule based on the destination port of 3222.

admin@XorPlus# set firewall filter copp sequence 51 from destination-port 3222
admin@XorPlus# commit