The set interface gigabit-ethernet rate-limiting ingress ratio command sets a rate limit value on a port for the ingress traffic in percentage.

NOTE:

  •   In the same direction of the same interface, kilobits and ratio cannot be configured simultaneously.
  •   Tomahawk series switches (including Tomahawk, Tomahawk+, Tomahawk2 and so forth) do not support ingress interface-based rate limiting.


Command Syntax

set interface gigabit-ethernet  <interface-name> rate-limiting ingress ratio <value>


Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value is a string.

ratio <value>

Specifies the rate limit value in percentage of the interface rate. The value is an integer that ranges from 0 to 100.

When the value is configured to 0, it indicates no rate limit on the interface.


Example

admin@Xorplus# set interface gigabit-ethernet ge-1/1/1 rate-limiting ingress ratio 10
admin@Xorplus# commit