The set protocols igmp-snooping vlan-id querier address command configures the source IP address of the general query message and group-specific query message sent by the querier.


Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> querier address <querier-address>


Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

querier address <querier-address>

Specifies a source IP address. The value is in dotted decimal notation. The default value is 0.0.0.0.


Usage Guidelines

After the Layer 2 device enables the querier function, you can run this command to configure the source IP address of the general query message and group-specific query message sent by the querier.


Example


admin@XorPlus# set protocols igmp-snooping vlan-id 2 querier address 192.168.10.2 
admin@XorPlus# commit