The run show dot1x dynamic filter command displays the dynamic filter rules configured on the switch.


Command Syntax

run show dot1x dynamic filter <filter-name>


Parameter

Parameter

Description

<filter-name>

Optional. Specifies the dynamic ACL filter name. The value is a string.

  •   If displaying with a filter name, display the specified dynamic ACL filter rules.
  •   If displaying without a filter name, display all the configured dynamic ACL filter rules.


Exampe

admin@Xorplus# set protocols dot1x filter f4 sequence 500 from destination-address-ipv4 192.168.2.0/24
admin@Xorplus# set protocols dot1x filter f4 sequence 500 then forward
admin@Xorplus# run show dot1x dynamic filter
=================================================================
Filter: f4
    Description : 
    --------------------------------------------------------------------
    Sequence            : 500
        Description      : 
        Match counter    :  60544 packets
        Match Condition  :
                         Destination IPv4Net : 192.168.2.0/24
        Action          : FORWARD
=================================================================
        Applied Clients   : ge-1/1/1 00:00:00:11:22:33