The set protocols snmp trap-group event cpu-threshold interval command configures the time duration for which the CPU usage continues to exceed the overload threshold or fall below the low threshold.


Command Syntax

set protocols snmp trap-group event cpu-threshold interval <interval>


Parameter

Parameter

Description

interval <interval>

Specifies the time duration. The value is an integer, in seconds, that ranges from 5 to 4294967295.

The default value is 300s.


Usage Guidelines

Generally, if the CPU usage of the system exceeds the threshold for a short period of time, the CPU usage is considered to be in the normal range, and no CPU usage alarm will be generated. Similarly, if the CPU usage falls below the low threshold but doesn’t persist for the duration of interval time, again, no CPU usage alarm will be sent.

The system samples CPU usage one time every 5 seconds, if the CPU usage is out of the threshold range over this interval time, a SNMP trap message will be sent. But once CPU usage falls back into the threshold range and the duration time is not up, the duration time then will be recalculated and the trap message won’t be sent.


Example

admin@Xorplus# set protocols snmp trap-group event cpu-threshold interval 300
admin@Xorplus# commit