The set protocols dot1x aaa radius nas-ip command configures the NAS IP address to the interface IP which connected to the RADIUS server.


Command Syntax

set protocols dot1x aaa radius nas-ip <ip-address>


Parameter

Parameter

Description

nas-ip <ip-address>

Specifies the NAS IP address to the interface IP which connected to the RADIUS server.


Usage Guidelines

This command is to set the nas-ip field in RADIUS access-request message. The value of the NAS IP address depends on the port connected to the RADIUS authentication server:


Example

admin@Xorplus# set protocols dot1x aaa radius nas-ip 10.10.10.100
admin@Xorplus# commit