The set interface gigabit-ethernet cdr command configures whether to enable or disable the CDR function.

NOTE:

    • CDR function can only be configured on the 100G or 40G optical module interface and the four sub-interfaces it breaked out from.

    • The CDR configurations of the four sub-interfaces which breaked out from the 100G or 40G optical module interface should be the same.


Command Syntax

set interface gigabit-ethernet <interface-name> cdr [true | false]


Parameter

Parameter

Description

gigabit-ethernet <interface-name>

Specifies the physical interface or sub-interface name. For example, te-1/1/49 and xe-1/1/49.1.

cdr [true | false]

Configures whether to enable or disable the CDR function. The value is true or false.

true: enables the CDR function.

false: disables the CDR function.

The default value is true.


Example
•    Enable the CDR function on interface te-1/1/49. 

admin@Xorplus# set interface gigabit-ethernet te-1/1/49 cdr true
admin@Xorplus# commit


•    Disable the CDR function on interface te-1/1/49. 

admin@Xorplus# set interface gigabit-ethernet te-1/1/49 cdr false
admin@Xorplus# commit