View Source

This command is to control the data packets to forward on a specified LAG .

NOTE：

The configuration of this command takes effect only on known unicast traffic.

Command Syntax
set interface aggregate-ethernet <lag_name> hash-mapping mode <mode>
delete interface aggregate-ethernet <lag_name> hash-mapping mode

Parameter
• <lag_name> Name of LAG interface.
•<mode> Configure hash mapping mode. The default value is ethernet-source-destination.

advance Use global advanced configure as hash-key
advanced-resilient Use resilient hashing with advanced configure as key
ethernet-destination-only Use destination mac as hash-key
ethernet-source-destination Use source and destination mac as hash-key
ethernet-source-only Use source mac as hash-key
ip-destination-only Use destination ip as hash-key
ip-source-destination Use source and destination ip as hash-key
ip-source-only Use source ip as hash-key

Example
• This example is configure hash mapping mode to ethernet-destination-only advance for ae1:

admin@XorPlus# set interface aggregate-ethernet ae1 hash-mapping mode ethernet-destination-only 
admin@XorPlus# commit