The set protocols vrrp interface vrid authentication type command configures an authentication mode for a VRRP group.

NOTE:

VRRP authentication is only supported by VRRPv2, which is not supported by VRRPv3.


Command Syntax

set protocols vrrp interface <interface-namevrid <virtual-router-id> authentication type <none | md5 | simple>


Parameter

Parameter

Description

interface <interface-name>

Specifies the Layer 3 interface name of VRRP device. The value is a string.

vrid <virtual-router-id>

Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254.

authentication type <none | md5 | simple>

Specifies the authentication mode. The value could be none, md5 or simple.

  •   none: Indicates no authentication.
  •   md5: Indicates MD5 authentication.
  •   simple: Indicates simple authentication.

By default, there’s no authentication.


Usage Guidelines

NOTE:


Example

admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 authentication type md5
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 md5-key picos123
admin@Xorplus# commit