The run show msdp peer command displays the status information of the MSDP peers.
Note: Use this command only on MSDP peers.
Command Syntax
run show msdp peer [<peer-ip> | detail]
Parameter
Parameter | Description |
<peer-ip> | Optional. Specifies the address of a remote MSDP peer. If this parameter is not specified, information about all the MSDP peers will be displayed. The address is in dotted decimal notation. |
detail | Optional. Displays detail information about the status of MSDP peers. |
Example
admin@Xorplus# run show msdp peer Peer Local State Uptime SaCnt 3.3.3.3 2.2.2.2 established 06:10:45 2 |
admin@Xorplus# run show msdp peer detail Peer : 3.3.3.3 Local : 2.2.2.2 Mesh Group : 6.6.6.6 State : established Uptime : 06:10:52 Keepalive Timer : 00:00:08 Conn Retry Timer : --:--:-- Hold Timer : 00:00:46 Last Reset : - Conn Attempts : 22 Established Changes : 1 SA Count : 2 Statistics : Sent Rcvd Keepalives : 371 4 SAs : 0 748 |
admin@Xorplus# run show msdp peer 3.3.3.3 Peer : 3.3.3.3 Local : 2.2.2.2 Mesh Group : 6.6.6.6 State : established Uptime : 06:11:03 Keepalive Timer : 00:00:57 Conn Retry Timer : --:--:-- Hold Timer : 00:00:35 Last Reset : - Conn Attempts : 22 Established Changes : 1 SA Count : 2 Statistics : Sent Rcvd Keepalives : 372 4 SAs : 0 748 |