The set firewall filter sequence then policer command configures the policer for packets matching a filter sequence.


Command Syntax

set firewall filter <filter-name> sequence <sequence-number> then policer <policer-name>


Parameters

ParameterDescription

filter <filter-name>

Specifies filter name, the value is a string type, spaces are not allowed.

sequence <sequence-number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

policer <policer-name>

Specifies the policer name. The value is a string.


Example

admin@Switch# set firewall filter MyFilter sequence 1 from source-address-ipv4 	192.168.1.1/32
admin@Switch# set firewall filter MyFilter sequence 1 then policer MyPolicer